SpeedoHealer INSTALLATION

2007-2008 Kawasaki ZX-6R

Note: Use this guide in conjunction with the instructions received with your SH-K01 harness kit.

1.  Take off the seat. Raise and support the fuel tank.

2.  The picture below shows the speed sensor coupler disconnected. Connect the 3p SH harness plugs to these connectors.

3.  Place the SH box in the trunk, mount it with supplied velcro.

4.  Route the SH harness along the frame to the location of the unit.

5.  Use the on-line calculator to generate the programming instructions.