SpeedoHealer INSTALLATION

2004-2008 Yamaha XT660 R/X

Note: Use this guide in conjunction with the instructions received with your SH-Y01 harness kit.

1.  Remove the seat and the left side panel:

2.  Disconnect the Speed Sensor coupler:

3.  Connect the SH harness connectors to the Speed Sensor coupler.

4.  Mount the SH box under the seat with the supplied Velcro strips.

5.  Route the SH harness along the frame to the location of the box, then plug-in the 4p harness connector:

6.  Test the SH functions as per the the supplied install instructions.

7.  Use the on-line calculator to generate the programming instructions.

marjani - expert member of www.xt660.com