SpeedoHealer INSTALLATION

1998-2001 Honda VFR800

Note: Use this guide in conjunction with the instructions received with your SH-H01 harness kit.

Pictures are taken from the SpeedoHealer review by CanadianStreetBike with permission.

1.  Remove the seat and the left side fairing.

2.  Locate the Speed Sensor coupler and disconnect it. It is hidden behind the left frame spar:

3.  Connect the 3p SH harness connectors to the speed sensor coupler:

4.  Mount the box with the supplied Velcro. Route the harness to the location of SH, then use the supplied zip-ties to secure the harness:

5.  Open the on-line calculator to generate the programming instructions.

Chris L., Canada

http://www.canadianstreetbike.com/