SpeedoHealer INSTALLATION

1998-2003 Suzuki TL1000R

Note: Use this guide in conjunction with the instructions received with your SH-S01 harness kit.

1.  Ok its easy: 1st remove left side plastic, its going to be easy installation with them off.

2.  Find the plug which should be right above the battery, unplug the cable and plug in the Harness kit. Should look like this when done:

3.  Get the red cable through the frame so its hidden and connected to the Speedo Healer, look something like this.

4.  Now place the Speedo healer where its easy to locate and press the interesting buttons. I choose under the Drivers seat. And just plug it in and follow the directions on the Instructions.
And whala, its installed and after programming the speedo healer should work, mine did, and im 19. If I can do this anyone can :-)

Dejan B., USA