SpeedoHealer INSTALLATION

2003-2008 Suzuki SV1000S

Note: Use this guide in conjunction with the instructions received with your SH-S01 harness kit.

1.  The picture below shows the location of the speed sensor coupler on the left, behind the frame.

2.  Disconnect the 3p coupler.

3.  Route the SH harness as follows.

4.  Connect the 3p harness connectors.

5.  Route the harness towards the trunk.

6.  Place the unit in the trunk, mount it with supplied velcro.

7.  Use the on-line calculator to generate the programming instructions.

Chris S., USA