SpeedoHealer INSTALLATION

2002-2008 Triumph Speed Triple

Note: Use this guide in conjunction with the instructions received with your SH-T01 harness kit.

1.  Remove the seat, fuel tank and airbox.

2.  The picture below shows the location of the speed sensor coupler under the airbox. Disconnect the coupler:

3.  Hook up the SH harness connectors:

4.  Route the SH harness along the frame to the location of the unit. Mount it with the supplied velcro strips.

     Plug-in the 4p harness connector. Make sure there is no sharp bend near the 4p SH connector.

5.  Use the on-line calculator to generate programming instructions.

 

Fabrice L., France