SpeedoHealer INSTALLATION

2003-2004 Yamaha YZF-R6

Note: Use this guide in conjunction with the instructions received with your SH-Y01 harness kit.

1.  Raise and support the fuel tank.

2.  Locate the speed sensor coupler (the white 3p plug below) and disconnect it.

3.  Mount the SH box under the passenger's seat with the supplied Velcro.

4.  Route the SH harness along the frame to the location of the box, then plug-in the 4p harness connector.

5.  Test the SH functions as per the the supplied install instructions.

6.  Use the on-line calculator to generate the programming instructions.

Jeff B. (USA) & Gufi (Hungary)