SpeedoHealer INSTALLATION

2006-2008 Kawasaki Ninja 650R

Note: Use this guide in conjunction with the instructions received with your SH-K01 harness kit.

1.  Remove the seat, took the plastics off of the gas tank. Prop up the tank.

2.  The speed sensor is mounted on the front sprocket cover.

     Trace the wires until you find the 3p black speed sensor coupler under the tank. It is just behind the top of the left side fairing.

3.  Disconnect the speed sensor coupler and connect the SH harness connectors.

4.  Run the harness past the tool tray to the next empty space. Mount with supplied velcro strips.

5.  Use the on-line calculator to generate the programming instructions.

The whole thing works great, am sure glad I bought it!

John E. L., USA