SpeedoHealer INSTALLATION

2006-2008 Suzuki Boulevard M109R / Intruder M1800R

Note: Use this guide in conjunction with the instructions received with your SH-S02 harness kit.

1.  Remove the seat and the left side cover.

2.  Locate the speed sensor coupler above the key switch.

3.  Disconnect the 3p black speed sensor coupler and connect the SH harness connectors.

4.  Place the unit under the seat, mount it with supplied velcro strips.

5.  Use the on-line calculator to generate the programming instructions. The factory speedo error is about 7%

Jonathan S., USA