SpeedoHealer INSTALLATION

2001-2006 Suzuki GSF1200S

Note: Use this guide in conjunction with the instructions received with your SH-S01 harness kit.

1.  Remove the left side panel

2.  The picture below shows the 3p black speed sensor coupler disconnected.

3.  Connect the 3p SH harness plugs to these connectors.

4.  Place the SH box in the trunk, mount it with supplied velcro.

5.  Route the SH harness along the frame to the location of the unit.

6.  Use the on-line calculator to generate the programming instructions.