SpeedoHealer INSTALLATION

1998-2003 Yamaha FZ6 Fazer

Note: Use this guide in conjunction with the instructions received with your SH-Y01 harness kit.

1.  The Speed Sensor is mounted at the front wheel. Trace the cable to the location of the speed sensor coupler, under the air box.

2.  Disconnect the Speed Sensor coupler.

3.  Hook up the SH harness.

4.  Mount the SH box under the passenger's seat with the supplied Velcro.

5.  Route the SH harness along the frame to the location of the box, then plug-in the 4p harness connector.

6.  Test the SH functions as per the the supplied install instructions.

7.  Use the on-line calculator to generate the programming instructions.