SpeedoHealer INSTALLATION

2006-2007 Honda CBR1000RR

Note: Use this guide in conjunction with the instructions received with your SH-H03 harness kit.

1.  Remove the seat, raise and support the fuel tank. Refer to your bike's Service Manual.

2.  Disconnect the 3p speed sensor coupler and hook up the SH harness.

3.  Mount the SH box under the passenger's seat with the supplied Velcro.

4.  Route the SH harness along the frame to the location of the box, then plug-in the 4p harness connector.

5.  Use the on-line calculator to generate the programming instructions.

Brian P., USA