SpeedoHealer INSTALLATION

2004-2005 Honda CBR1000RR

Note: Use this guide in conjunction with the instructions received with your SH-H02 harness kit.

1.  The kit:

2.  Remove the seat, raise and support the fuel tank. Refer to your bike's Service Manual.

3.  The picture below shows the speed sensor coupler disconnected:

4.  Hook up the SH harness connectors:

5.  Mount the SH box under the passenger's seat with the supplied Velcro strips.

     Route the SH harness along the frame to the location of the box, then plug-in the 4p harness connector.

6.  Secure the top speed recall button to the ignition switch block:

7.  Use the on-line calculator to generate the programming instructions.

Savas P., Germany