SpeedoHealer INSTALLATION

2006-2008 Honda CBF1000

Note: Use this guide in conjunction with the instructions received with your SH-H02 harness kit.

1.  Remove the seats.

2.  Remove the right side cover. Disconnect and remove the battery.

3.  Locate the speed sensor coupler.

4.  Push the connector towards you with a screwdriver, and disconnect it.

5.  Connect the 3p SH harness plugs to the speed sensor coupler.

6.  Side view of the area.

7.  Place the unit in the trunk, mount it with supplied velcro strips. Route the harness along the frame to the location of SH.

8.  Use the on-line calculator to generate the programming instructions.

Christian W., Germany