Specifications

 

External attributes

-    Dimensions: 54x41x15 mm    (2,1 x 1,6 x 0,6 inches)

-    Weight: 40 grams    (1,4 ounces)

-    Storage and Operational temps: -40 C to +80 C    (-40 F to +176 F)

-    Long-lasting design (100% weather proof)

 

Features

-    New generation high speed processor with Flash memory

-    Quick and easy set-up

-    Calibrator, Converter and Top Speed Memory in one unit

-    Parameter values are stored in solid Flash memory instead of specific mechanical switch positions

-    Mile and Km conversion while still allowing the full calibration range

-    No lag, immediate response to input signal

-    Interactive test modes

-    The display unit can be analyzed via the built-in frequency generator

-    Multifunctional extra bright LED

-    Only inspected, high quality components are built in

 

Technical data

-    Calibration range: -99.9% to +99.9%

-    Step/Resolution: 0.1%

-    Used mile/km conversion value: 1.609344

-    Optimized, real time 32 bits floating point calculations

-    Start-up time with self-test: 0.8 sec

 

Input lead attributes

-    Can be connected to any speed sensor (*)

-    Short protection (to ground and power)

-    Protecting the Speed Sensor (power and transient filtering)

 

Output lead attributes

-    Short protection (to ground and power)

-    Clean signal to Dashboard/ECM

 

Power lead attributes

-    Required supply voltage: +8 V to +20 V

-    Reverse polarity protection

-    Noise filtering, transient- and over voltage protection

-    Supply current typical: 10 mA @ 12 V

-    Supply current maximal: 16 mA @ 12 V

 

*: The unit can be connected to any 3-wire speed sensor and to the 2-wire ground switch sensor.
We are offering custom model for the 2-wire inductive (pickup coil) speed sensor.