|
Notes:
| 1. | The measurement must be done
with the SH uninstalled or set in Transparent mode (click Here for instructions). |
| 2. | It is recommended to note the
indicated speed at about 100km/h (60mph) actual speed. |
| 3. | The values can be in any
speed or distance units of measure, but the two values must be in the same
units. |
| 4. | On most vehicles the
speedometer has more factory error than the odometer. Therefore if you need
highly accurate speedo, use the speedo for measurements. Otherwise use the
odometer/trip meter. |
|
|
How to use the calculator:
- Enter your measurement data
- Select the conversion mode if necessary
- Press 'Calculate' and then 'Generate..' |
|